1:10 Roof Luggage Rack# G172U

Introduction: The roof bracket seat and crossbar are made of carbon-mixed nylon plastic, with aluminum alloy rods on both sides, which are light and tough, ensuring strength and reducing the weight of the roof as much as possible. The installation width of the bracket is adjustable and the length is adjustable, which can be adapted to various roof sizes.

Material: mixed carbon nylon plastic + aluminum alloy

Applicable: 1:10/1:8 simulated vehicles.

common problem:

1. When installing this kit, you need to drill a 2mm hole on the roof.

2. The shipping status is KIT parts, which need to be assembled by yourself.

3. For specific installation reference, see the installation instructions at the end of the page.

4. This kit can be installed on some models with short roofs, which can be processed by DIY, and the length of some aluminum rods can be cut off according to the specific roof size. Such as TRX6.

The effect of roof bracket assembly is displayed:

1:10 Roof Box Type A# G172X

Introduction: The roof box adopts a streamlined design, with the details of the rear diversion groove, the appearance of the product has a unique personality. The cover can be opened, and the internal space is ample, which can easily hold a 6400mAh 3S battery.

Material: Highly flexible plastic

Applicable: 1:10/1:8 simulated vehicles.

serial number: 

Black: G172XB

Red: G172XR

White: G172XW

Yellow: G172XY

Silver: G172XS

Blue: G172XC 

Speed ​​Gray: G172XG

Kaqi color: G172XK 

common problem:

1. The bottom of this kit is flat and can be directly glued to the flat roof with double-sided adhesive.

2. The shipping status is KIT parts, which need to be assembled by yourself.

3. If it is inconvenient to disassemble and assemble the R buckle of the car shell post after installing the suitcase, a magnetic car shell post can be installed instead of the transmission R buckle car shell post to fix it!

The assembly effect of Type A suitcase is displayed:

GRC 1:10 Roof Box (with Bracket) Type A# G172A

Introduction: The roof box adopts a streamlined design, with the details of the rear diversion groove, the appearance of the product has a unique personality. The cover can be opened, and the internal space is ample, which can easily hold a 6400mAh 3S battery. The roof bracket seat and crossbar are made of carbon-mixed nylon plastic, with aluminum alloy rods on both sides, which are light and tough, ensuring strength while reducing the weight of the roof as much as possible. The installation width of the bracket is adjustable and the length is adjustable, which can be adapted to various roof sizes.

Material: mixed carbon nylon plastic + aluminum alloy

Applicable: 1:10/1:8 simulated vehicles.

serial number: 

Black: G172AB 

Red: G172AR 

White: G172AW

Yellow: G172AY

Silver: G172AS

Blue: G172AC

Speed ​​Gray: G172AG

Kaqi color: G172AK

common problem:

1. When installing this kit, you need to drill a 2mm hole on the roof.

2. The shipping status is KIT parts, which need to be assembled by yourself.

3. If it is inconvenient to disassemble and assemble the R buckle of the car shell post after installing the suitcase, a magnetic car shell post can be installed instead of the transmission R buckle car shell post to fix it!

Model A suitcase (with bracket) assembly completion effect display:

Luggage Holder Dimensions:

Type A suitcase size :

Type A suitcase size :

yellow:

White:

silver:

red:

black:

blue:

Speed ​​Gray: Khaki:

Display of the loading effect of the roof luggage rack: (the vehicle is only for display, not included in this product)

Model A suitcase loading effect display: (the vehicle is only for display, not included in this product)

The bottom of the trunk is flat and can be installed on a flat roof with 3M glue. It is recommended to use a special bracket for installation.

Model A suitcase (suitcase + bracket) loading effect display: (vehicle is for display only, not included in this product)

Designed with a single side openable cover

Internal Spatial Reference: Format 3S 6400mAh

Roof Luggage Rack Product Assembly Instructions:

Note: The bracket in the roof is optional, please choose whether to install it according to the shape of the roof

Assembly instructions for suitcase A:

Among them, the middle bracket is an optional part, and you need to choose whether to install it according to the shape of the roof.

GRC has specially launched a special crossbar bracket for the installation of the tank 300 model, click here to jump to buy

Loading effect display:

This type of roof luggage can also be installed on the electric room or drifting models using the GRC special bracket, (click here to buy the special bracket )

Loading effect display: